© 2024 Hexagon AB and/or its subsidiaries
© 2024 Hexagon AB and/or its subsidiaries
The HP-OW sensor uses chromatic white-light spectroscopy to take highly accurate measurements on varied surface finishes.
The sensor has a measurement range of several millimeters while achieving a resolution in the nanometric range. In combination with a large acceptance angle of up to ±30°, it provides very versatile measurement possibilities, making it ideally suited to measure anything from small features to large surfaces.
HP-OW probes are available in three variations, making it possible to adapt to different measurement ranges, working distances, and other metrology requirements. When combined with the HR-R sensor rack, inspection cycle time is significantly reduced.
Measure challenging surfaces such as shiny surfaces, glass and other transparent/reflective or sensitive materials. In addition, the thickness of workpiece areas.
Spirals over the calibration sphere, resulting in significant reduction of the process time.
Sensor can be exchanged during the measurement program with different Hexagon sensors to achieve the highest possible levels of flexibility.
Designed to fit on most Hexagon CMMs, including the GLOBAL and OPTIV machines. Compatible with optical probe heads, the SENMATION sensor change interface, the HR-R sensor rack and PC-DMIS software.
This technology makes it possible to measure nearly every material and can also be used to measure thickness, surface topography, ovality, roughness or shape.
Measuring range
2 mm (HP-OW-2.14)
2 mm (HP-OW-2.61)
3 mm (HP-OW-3.22)
Working distance
14.1 mm (HP-OW-2.14)
61 mm (HP-OW-2.61)
22.5 mm (HP-OW-3.22)
Spot diameter
12 μm (HP-OW-2.14)
12.5 μm (HP-OW-2.61)
12 μm (HP-OW-3.22)
Resolution in Z direction
66 nm (HP-OW-2.14)
66 nm (HP-OW-2.61)
100 nm (HP-OW-3.22)
Acceptance angle
+/- 30° (HP-OW-2.14)
+/- 15° (HP-OW-2.61)
+/- 30° (HP-OW-3.22)
Max. thickness
3 mm (HP-OW-2.14)
3 mm (HP-OW-2.61)
4.5 mm (HP-OW-3.22)
Mounting
HH-AS8-OWT2.5 (HP-OW-2.14)
HH-AS8-OWT2.5 (HP-OW-2.61)
HH-F-OWT (HP-OW-3.22)
Probing size error
4.6 μm (HP-OW-2.14)
4.6 μm (HP-OW-2.61)
5 μm (HP-OW-3.22)
